- Chassis & Suspension (181)
- Calvert Racing Suspension (102)
- Mono Leafs (24)
-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
RACE STAR 92-745242DSD DRAG STAR 17" X 4.5", 5 X 4.75" BC, 1.75" BS, HQ, CHEV, GM (BLACK)
$455.00
-
Bosch Single Fuel Pump Bracket (Blue)
$23.53
-
100 Series Swivel Taper 150° Hose End -6AN
Black Finish. Suit 100 & 450 Series Hose$30.60
-
90° Male NPT to Female AN Adapter 1/2" to -12AN
Black Finish$44.01
-
A/C 90° Fitting -10AN (without Charge Port)
$26.43
-
Male NPT to AN Barb Straight Adapter 3/8" to -6AN Hose
Silver Finish$13.64
-
45° Male ORB Full Flow Swivel Hose End -16 ORB to -16AN
Silver Finish$55.76
-
180° Silicone Hose Elbow 2" (51mm) I.D
Gloss Black Finish. 3-15/16" (100mm) Leg$22.53
-
AF77-5001BLK - AEROFLOW FABRICATED VALVE COVER FITS FORD 302-351 CLEVELAND
$569.00
-
10 Gallon Steel Portable Air Tank - Black (125 PSI Max)
Includes Valve, Air Line & Pressure Gauge.$91.93
-
Visit our Ebay store
for more products
-
Straight AN Male Flare Adapter to ORB -12AN to -20 ORB
Silver Finish$19.43
-
Stainless Steel Straight Banjo Fitting (Long)
10mm (3/8") Banjo to -3AN PTFE Hose$18.03
-
45° Tube to Male AN Adapter 1/4" to -4AN
Black Finish. Suits Aeroflow, Moroso & Russell Tubing$34.97
-
COMP CAMS High Energy Hydraulic Lifters Suits Chrysler V8
$229.00
-
AUTOMETER 4414 2-5/8" FUEL LEVEL, 0-90 Ω, AIR-CORE, SSE, ULTRA-LITE
$128.00
-
Male Flare Union -6AN
Silver Finish$4.61
-
45° Silicone Hose Reducer 3" - 2" (75-51mm) I.D
Gloss Blue Finish. 5-33/64" (140mm) Length$25.95
-
Ford Cleveland Motorsport Rocker Cover Bolt Kit (Cap Screw)
$0.00
-
00-10606-GEN4-SF NITROUS OUTLET 4150 STINGER 4 RACE SOLENOID FORWARD CONVERSOIN KIT
$1,589.00
-
'Back to the Future' Plymouth Satellite Outlaw Nitro Funny Car T-Shirt
Small$0.00
- No News
CALVERT PS910-860R - 2" PARABOLIC SPRING (PAIR) 2" DROP USE WITH CALTRACS FITS GMH HQ-WB UTE
REVERSE REAR SPRING EYE
-2″ DROP HEIGHT, 2″ WIDE MONO PARABOLIC LEAFSPRINGS
Alternative for aftermarket spring. Substantially lighter than multi-leafsprings.
Parabolic spring design distributes stress along the length of the spring, reducing stress on the arch. Each spring pair is arch verified. Center pins and bushings included.
NOTE: These springs are designed for DRAG RACING and have a higher spring rate / stiffer ride than stock springs. Springs are dipped in black paint before assembly, but some raw steel may show due to deburring/grinding sharp edges.
Calvert Mono Leafsprings are designed to work with CalTracs to maintain arch. While street driving does not put undue stress on the springs, racing with Calvert springs without a traction device installed may result in bent or de-arched springs.