- Aeroflow Fittings, Hoses & Turbo Accessories (9517)
-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
LUCAS ASSEMBLY LUBE SEMI SYN 10152
$20.50
-
STREET TERRA HOLDEN INLINE 6 STREET TERRA 5/16"-7/16" SHAFT [1.5 RATIO] ROCKERS (ST 2030A)
$685.00
-
Billet Aluminium Dual Hose Separators
15/16" I.D., Silver Finish$12.02
-
Oil Filter
Holden, Jeep & Toyota (Z30) 13/16-16$11.99
-
Cushioned P-Clamps 3/16" (4.7mm)
Black Finish, 10 Pack$20.82
-
Male NPT Taper Swivel Straight Hose End 3/4" to -16AN
Blue/Red Finish. Suit 100 & 450 Series Hose$30.60
-
Weld Racing 784P-1704204 V-Series Polished Wheels 17 in. x 4.5 in., 5 x 4.50 in
$1,670.00
-
400 Series Push Lock 90° Hose End -12AN
Black Finish. Suits 400 Series Hose$29.92
-
Weld-On Push Lock Barb Fitting
3/8" Aluminium$5.46
-
NPT Pipe Reducer 1/2" to 1/4"
Black Finish$7.27
-
Visit our Ebay store
for more products
-
90° Male NPT to Female AN Adapter 3/8" to -8AN
Black Finish$26.26
-
Comp Cams Drag Race Solid Flat Tappet 252@50in 262@50ex Lobe Sep 106deg 542in/555ex Lift Suit Chrysler 273-360
$293.00
-
100 Series Stainless Steel Braided Hose -12AN - Black
15 Metre Length$580.69
-
Mid Mount Billet Alternator Bracket
Polished Finish. Suit Holden V8, driver side$214.48
-
Magnafuel MP-4401-10 ProStar 500 Cam Ring/Rotor Assembly
$99.00
-
PACEMAKER EXTRACTORS Suit (Falcon-Fairlane AU-TE50-XR8 5 Litre EFI) 1 5/8'' Primary TRI-Y Design
$655.60
-
90° Male Flare Union with 1/8" Port -8AN
Blue$12.44
-
BSPP Washer Seal To AN Male Adapter
1/2" to -10AN, Black Finish$5.82
-
Billet Aluminium Dual Hose Separators
5/16" I.D., Red Finish$11.04
-
Crower Severe-Duty Oversized Bearing Solid Roller Lifters With High Pressure Pin Oiling .903dia Offset Inlet Suit BBC 396-572
$1,302.00
- No News
2 Metre Length
The Aeroflow 100 series hose is a true double braided stainless hose that uses the highest quality stainless wire available in the world.
- Constructed with a stainless steel outer braid that resists abrasion and corrosion
- Combined with a reinforced Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid.
- For use with fuel systems, methanol, oils, lubricants, coolant systems and vacuum applications.
- Minimum temperature -40°C, Maximum temperature 150°C
NOT RECOMMENDED FOR: Brake systems, Extreme heat areas and use inside passenger compartments (due to permeation). For these applications use 200 series hoses & fittings.
100 Series Hose specifications:
AN Size: -16Hose I.D: 7/8" (22.2mm)
Hose O.D: 13/64" (30.5mm)
Operating Pressure: 750 psi
Burst Pressure: 2500 psi