- Aeroflow Fittings, Hoses & Turbo Accessories (9517)
-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
Stainless Steel Inverted Flare Tube Nut
3/8"-24 to 3/16" Hard Line$9.65
-
45° Stainless Steel Hose End -4AN
-4AN to -3 PTFE Hose$37.60
-
Tee with NPT On Run 1/8" to -3AN
Black Finish$11.04
-
ARP 102-2801 FLYWHEEL BOLTS Chromoly Black Oxide 12 Point Suit Nissan RB25-26 M12x1.25 1.180 UHL
$101.00
-
AeroFlow Air Cleaner Assembly14'' x 3'' Drop Base Black Washable Element
$129.00
-
Replacement Oil Pan, Black Finish
Suit SB Chev R/H Dipstick, 1-Piece Seal (5.0L Capacity)$57.64
-
STR-U1672 STRANGE WELD ON YOKE (1350) Forged Chrome-Moly For 3'' x .083 Tube
$168.00
-
Male to Male Barb Push Lock Adapter -6 to -8
Black Finish$9.65
-
90° AN Bulkhead -6AN
Silver Finish$11.04
-
45° NPT to AN Full Flow Adapter 1/8" to -4AN
Blue Finish$8.25
-
Visit our Ebay store
for more products
-
Male NPT to Female AN Straight Fitting 1/4" to -6AN
Silver Finish$9.65
-
Straight Silicone Hose Reducer 2-3/4" - 2-3/8" (70-60mm) I.D
Gloss Blue Finish. 5" (127mm)$15.94
-
ARP 134-1504 LS1,2 Rear Motor Cover Bolts 12 Point Chromoly Black Oxide Kit
$47.75
-
Stainless Steel Weld-On Male AN Fitting -16AN
$33.41
-
570 Series One-Piece Full Flow 150° Hose End -6AN
Blue/Red Finish. Suit 200 Series PTFE Hose$29.21
-
570 Series One-Piece Full Flow 60° Hose End -6AN
Silver Finish. Suit 200 Series PTFE Hose$27.81
-
Aluminium Fuel Line 3/8" (9.5mm) 25ft (7.6m) Length Roll
Raw Finish$36.59
-
Comp Cams Spring Seat Cutter 1.440'' Cuts Guide .630''
$102.00
-
Lucas 10W/40 Racing Engine Oil 5quartz
$116.00
-
ARP 154-2006 Intake Manifold Bolt kit, Hex Head, Ford 351 Cleveland With Edelbrock RPM Air Gap Inlet Manifold
$59.00
- No News
15 Metre
The Aeroflow 100 series hose is a true double braided stainless hose that uses the highest quality stainless wire available in the world.
- Constructed with a stainless steel outer braid that resists abrasion and corrosion
- Combined with a reinforced Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid.
- For use with fuel systems, methanol, oils, lubricants, coolant systems and vacuum applications.
- Minimum temperature -40°C, Maximum temperature 150°C
NOT RECOMMENDED FOR: Brake systems, Extreme heat areas and use inside passenger compartments (due to permeation). For these applications use 200 series hoses & fittings.
100 Series Hose specifications:
AN Size: -10Hose I.D: 9/16" (14.2mm)
Hose O.D: 53/64" (20.8mm)
Operating Pressure: 1000 psi
Burst 5000