-
Visit our Ebay store
for more products
-
Visit Calvert Racing Suspensions
for more products
-
AUTOMETER 2237 GAUGE MOUNTING PANEL, DUAL, 2-1/16", BLACK, ALUMINUM
$38.00
-
45° AN Bulkhead -8AN
Black Finish$19.43
-
Straight Male to Male with 1/8" Port -3AN
Black Finish$11.04
-
Hex Hose Finisher 1-15/16" (49.2mm) Inside Diameter
Chrome Finish$23.62
-
90° Male NPT Full Flow Swivel Hose End 1/2" to -12AN
Silver Finish$37.60
-
EDL-7581 EDELBROCK RPM AIR-GAP Suit 351 Windsor
$589.00
-
AeroflowBreathers with S/Steel Element Polished -10
$65.00
-
Hex Hose Finisher 21/32" (16.5mm) Inside Diameter
Silver Finish$8.59
-
400 Series Push Lock 150° Hose End -4AN
Blue Finish. Suits 400 Series Hose$23.62
-
PRO SYSTEMS 1100 cfm Dominator Carby (4500)
$1,719.00
-
Visit our Ebay store
for more products
-
Stainless Steel Short Banjo with Double End AN -3AN
12mm to -3AN Male$27.81
-
Comp Cams Short Travel Race Hyd Roller Lifters Retro-Fit Link Bar Suit SBC
$1,102.00
-
510 Series Full Flow Tight Radius Push Lock 45° Hose End -8AN
Blue Finish. Suit 400 Series Hose$24.15
-
Single Billet Oil Filter Remote Mount Kit
$228.79
-
Aluminium Weld-On Female ORB Fitting -4AN
$4.33
-
550 Series Cutter One-Piece Full Flow Swivel 60° Hose End -4AN
Silver Finish. Suits 100 & 450 Series Hose$27.81
-
SIMPSON 0202293 PANTS BLACK INDURA 1-Layer Size-M-XL
$119.00
-
ARP Special Purpose Washers Chromoly Black Oxide 1/2''ID 7/8''OD .0120 Thick Set Of 10
$1.42
-
Billet 170A One Wire Alternator
$589.00
-
AEROFLOW PRO FILTER 40 MICRON BLUE FEMALE -8 ORB 1.25" x3.5" Aeroflow - AF 66-2042-40
$115.52
- No News
CALTRACS STANDARD LOW PRO (2301)
THIS KIT INCLUDES LOW PROFILE (1 Hole) PIVOT PLATES.
Low Profile allows approx. 1.5″ more ground clearance for vehicles used for every day street driving.
1967-1969 Chevrolet Camaro
1967-1969 Pontiac Firebird / TransAm
Designed by Race legend John Calvert. Bolt On traction system. Full pre-load adjustability, keeps axle from rotating/maintains pinion angle, improves 60′ times. Black powder coated for durability. Standard and Low Pro pivot plates available.
.
Specializing in leaf spring traction systems since 1995, the Calvert Racing Team knows what it takes to get your car hooking harder than ever. Designed by racers for racers, CalTracs boasts unsurpassed quality and craftsmanship; the competition is eliminated right off the starting line. The preload link is made with Chromoly, lightweight but strong, ensuring maximum leverage and minimum flex. ¾” Rod Ends have a radial static load capacity of over 14,000 pounds. Two-piece aluminum front spring eye bushings assembly keeps the front pivot squared and rigid. The rear mounts are made with 5/16” mild steel to withstand the correct torque on your u-bolts, keeping the rear end from moving.
.
NOTE: Your final product may vary from photo depending on your application. Some applications require additional hardware. U-bolts NOT included in the kit but are available if desired.
FULL COLOR INSTALLATION GUIDE INCLUDED.